Published November 17, 2026 • 5 min read
Most well owners in the Treasure Valley have never tested their water. The tap runs clear, the pump works, so nobody asks. But clear water can still carry bacteria, nitrates, iron and a lot of hardness, and none of that shows up until a fixture crusts over or a lab report says so. If you are on a private well in Star, Kuna, Eagle or Canyon County, here is what to test, when, and what to do with the results.
The Baseline Tests Every Well Needs
City systems test for you and publish a yearly report. A private well is your own responsibility. The EPA and CDC both recommend testing a private well at least once a year, and a basic yearly panel covers four things:
- Coliform bacteria: a sign that surface water or waste may be getting into the well.
- Nitrates: the EPA limit is 10 mg/L as nitrogen, and farm runoff and septic systems are common sources.
- pH: acidic water eats pipes and fixtures.
- Total dissolved solids: a general read on how mineral-heavy the water is.
The Tests That Match What You See
The baseline panel does not tell you why your faucets look the way they do. Add tests based on symptoms. White crust and spotty glasses call for hardness. Orange stains in toilets and on concrete call for iron, and a rotten-egg smell calls for sulfur. If you have stains but cannot tell the cause, our guide to hard water vs well water iron shows how to tell them apart.
Hardness is measured in grains per gallon. Anything above 7 is generally called hard, and above 10.5 very hard. A lab report that shows both high hardness and iron points to a different setup than hardness alone, which is why the number matters before you shop.
When to Test, and When to Retest
Test once a year, and pick a date you will remember, such as the day you switch your clocks back. Retest sooner if any of these happen:
- You repair or replace the pump, the well cap or any plumbing.
- There is flooding or heavy runoff near the well head.
- The water changes in taste, color or smell.
- Someone in the house, especially an infant, has unexplained stomach trouble.
- A nearby property digs, drills or changes its septic system.
Eagle owners can see a deeper walkthrough in our post on Eagle well water testing, and the water softener Eagle page covers what we see in that area.
How to Collect and Send a Sample
Use a state-certified lab and ask for its bottles, because a clean jar from your kitchen can skew a bacteria result. Collect from a faucet before any softener or filter, let the water run first, and follow the lab's timing instructions. Bacteria samples have a short shelf life, so deliver them quickly. Your local health district can point you to certified labs in the valley.
Reading Results and Picking Equipment
This is where most homeowners get stuck. Each result points to a different fix:
- High hardness: a softener, sized to your household and your hardness number.
- Iron or sulfur: a dedicated iron filter ahead of the softener. Slime points to bacteria, which we cover in iron bacteria in Idaho wells.
- Nitrates or coliform: a treatment plan chosen with your health district, plus safe drinking water in the meantime.
Our well water treatment page explains how those pieces fit together, and the water softener Star page covers common setups out that way. Once you have your lab report, call (208) 968-2771 for a free phone quote. Read us the numbers and we will tell you what fits.
Frequently Asked Questions
Have Your Lab Report? Get a Free Phone Quote
Tell us your hardness, iron and nitrate numbers and we will quote over the phone. No pressure, no pitch.