A softener that has stopped softening is easy to miss, because the brine tank still looks full. If your water feels hard, scale is back on the faucets or the salt level has not moved in weeks, start with a few quick checks and then call us.

Signs your softener has stopped working

  • The brine tank is full of salt but the level has not dropped in a long time
  • White crust is returning on faucets, showerheads or the toilet rim
  • Soap barely lathers and you are using more detergent
  • Dishes come out of the dishwasher spotted or cloudy
  • You cannot remember the last time it ran a regeneration cycle

Five-minute checks you can do first

Open the brine tank and check for a salt bridge, a hard crust across the top with an empty gap underneath. Push a broom handle into the salt. If it breaks through with a hollow sound or hits resistance partway down, break the crust up and run a manual regeneration. Keep the salt level between half full and three-quarters full, and use evaporated salt pellets instead of rock salt, which leaves sludge behind.

When it is the resin

If salt is present and the water is still hard after you have ruled out a bridge, the resin is the likely cause. Resin beads wear a little with every regeneration, and in our area realistic service life is closer to 8 to 12 years. Rust-colored staining in toilets and sinks can point to iron fouling, which uses up the resin's capacity. If the unit is past that age, a look at water softener replacement may make more sense than a repair.

What normal looks like

Most softeners regenerate overnight, often at 2 a.m., using roughly 35 to 65 gallons of water and 1 to 2 pounds of salt per cycle. A faint rushing or gurgling sound at night is usually just that. If your softener never seems to run, or runs constantly, tell us what you are hearing and seeing on the call.

How the free phone quote works

One call gets you a price. It runs about 15 minutes. We go through your water, the size of your home and what you are dealing with, then give you real numbers for your house. Describe what your softener is doing, the brand if you know it, and how old it is. We tell you what is likely going on and what the fix costs for your system. If you need a new unit instead, our water softener installation price covers everything, including parts.

There is no charge, no sales pressure and no commitment. Call (208) 968-2771 or book a time to talk.

Serving Boise, Meridian, Nampa, Eagle, Kuna, Caldwell and Star

Wherever you are in the valley, we can help. Water Softener Boise is locally owned, licensed and insured, and we work in Boise, Meridian, Nampa, Eagle, Kuna, Caldwell and Star. Treasure Valley tap water comes from deep volcanic aquifers loaded with calcium and magnesium, and city-by-city hardness runs from about 8 to 17 grains per gallon. Tell us your city and your home size on the call and we price from there.

Free Phone Quote

One call. A real price for your home.

Call (208) 968-2771

Or pick a time for a call

Common Questions

The usual causes are a salt bridge in the brine tank or worn resin. Pushing a broom handle into the salt is the quickest first check.
In our market realistic service life is closer to 8 to 12 years. Very hard water means more regeneration cycles, which wears the beads faster.
Use evaporated salt pellets. Rock salt is cheaper but leaves impurities that build up as sludge in the brine tank.
In Meridian and Nampa, every 3 to 4 months. In Boise on city water, about every 6 months. Wells with iron and sediment need it more often.